TOA 900 Noise Module
Click Here
for a specification sheet
DESCRIPTION
The
TOA 900 Noise Module is a pink or white noise generator. It plugs into an empty
module slot on the rear panel of the Series 900 TOA. The module connects
externally to the mainframe using RCA jacks. The module’s ‘NOISE OUT’ RCA jack
can connect to the TOA '‘PWR AMP IN’ jack or any other module placed in the TOA
mainframe. There is also a “BUS” jumper on the module to inject the noise to
the TOA amplifier’s internal summing bus. An 1/8th" screwdriver adjustment
hole on the module’s panel adjusts the noise output volume. Pink or White noise
is user selectable with a 2 pin shunt jumper on the circuit board.
KEY
FEATURES
- Fits all TOA Series 900
- Eliminates need for external
noise source
- Pink or White Noise Output
- RCA unbalanced output or
injected directly into the amp’s summing bus
- 1/8" screwdriver volume
adjustment
- Use as noise masking system or
as removable system test equipment
- Very Cost effective
- 3 year warranty
- Use in combination with EQ POD1.5DTM for the
ultimate in noise masking solutions, Click Here for a
specification sheet